LED Green Flexi Pole Mount Beacon | Reg 10 247-CA8184G

Description

Product Description:

LED Green Flexi Pole Mount Beacon | Reg 10 247-CA8184G

Volt : 12-24 Volts

Watts : 30 Watts

Number of LEDs : 60 x 0.5W LEDs

Flash Patterns : 3 Flash Patterns

IP Rating : Rated IP56

ECE Reg : Reg 10

Lens Material : Polycarbonate Lens

Base Material : Rubber Housing

Dimensions: 193*125mm

Operating Temperature: -30C to +50C

Nominal Current at 12V : Max 0.97A

Nominal Current at 24V: Max 0.47A

247 Lighting is an Irish based market leader of LED Lighting throughout Europe. We manufacture and distribute an extensive range of LED Lighting, Safety and Electrical products to the Commercial Vehicle, Agricultural Machinery and Automotive aftermarket industries.

247 Lighting are innovative in the adoption of new technologies and always moving forward to deliver the best service possible.  The LED lighting range has been developed with a strong emphasis on providing quality and high-performance products to its target market.

247 Lighting’s range of products are rigorously tested for full compliance with ECE standards, and have excellent waterproof and dust resistant qualities. Branding is instantly recognisable with striking colouring that we believe enhances your competitive advantage.

At 247 Lighting we go the extra mile for our customers. Our friendly team of product experts are always on hand to offer assistance to each customer, ensuring that they are completely satisfied when purchasing from 247 Lighting.

Strong and Bright Light

Suitable for all trucks and trailers: – Mixer, Dumper, Tipper Trucks. Heavy and Light Goods Vehicles; 20FT & 40FT Trailers; Low Loaders; Car Transporters; Skip and Tanker Lorries; Tractors & Trailers. 

All of our replacement parts are new high quality aftermarket parts unless stated otherwise. They are sourced from manufacturers to the original equipment market and have been made to the highest standards. However in some cases you may need a resistor if the indicator is flashing to quickly.

Rear lights are part of the vehicle lighting system and include the following:

• Tail lights

• Brake lights

• Turn signals

• Reversing lights

• Rear fog lights

Tail lights, brake lights and turn signals are used most frequently. The purpose of reversing lights is to indicate that a vehicle is moving backwards and rear fog lights provide a safety function when visibility is down to below 50 metres.

BULB LIGHTING

Buy vehicle bulbs for trucks from our 24v bulbs range at https://www.commercialvehiclelights.com. We stock a range of 24v lorry bulbs, 24v headlamps & replacement 24 volt bulb sets.

LED LIGHTING TECHNOLOGY

For instance Tail lights and brake lights benefit from the advantages of modern LED (Light Emitting Diode) technology. These include rapid switch-on for added safety: LEDs achieve full brightness as soon as they are switched on. This makes it possible to recognise braking signals more quickly and so react sooner to potentially hazardous situations. By comparison: A bulb takes a fraction of a second longer to achieve full brightness.

VALUE RETENTION

Thanks to their long life, outstanding reliability, compactness and low energy consumption, LEDs are increasingly taking over from conventional bulbs. Being virtually insusceptible to wear and requiring no maintenance, LED lights are a significant factor in terms of vehicle value retention.

Tail lights, brake lights and turn signals are used most frequently. The purpose of reversing lights is to indicate that a vehicle is moving backwards and rear fog lights provide a safety function when visibility is down to below 50 metres.

BULB LIGHTING

Buy vehicle bulbs for trucks from our 24v bulbs range at https://www.commercialvehiclelights.com. We stock a range of 24v lorry bulbs, 24v headlamps & replacement 24 volt bulb sets.

LED LIGHTING TECHNOLOGY

For instance Tail lights and brake lights benefit from the advantages of modern LED (Light Emitting Diode) technology. These include rapid switch-on for added safety: LEDs achieve full brightness as soon as they are switched on. This makes it possible to recognise braking signals more quickly and so react sooner to potentially hazardous situations. By comparison: A bulb takes a fraction of a second longer to achieve full brightness.

VALUE RETENTION

Thanks to their long life, outstanding reliability, compactness and low energy consumption, LEDs are increasingly taking over from conventional bulbs. Being virtually insusceptible to wear and requiring no maintenance, LED lights are a significant factor in terms of vehicle value retention.